Sorane/ All handmade and hand assembled by craftsmen Since company foundation in 1974, Katsuaki Ishiyama-san established and collected designing and development knowhow for various tonearms (And other analog equipment), manufactured by only handmade and assembled process, with his belief the fine tuning is only available by craftsmen’s precise and sensitive hand for variety of analog gears. Even applying for modern technology of CNC milling machine at their own plant for basic parts production, their expertise are still there to rely on their craftsmen’s process, in particular, during assembling process for many parts to have idealized mechanical surface contact with each other, by hand-tuned and hand-adjusted. Gimbal-bearing designs for excellent bass, dynamics and imaging, as well as unconditional azimuth stability (the biggest problem for unipivots Detachable headshells to allow quick changes of cartridges, the adoption of various mass headshells (to help change the effective mass of the arms and cartridges), and the ability to mount cartridges in a well lit area, in a safe and convenient manner. Machine-tooled and hand-assembled by skilled Japanese craftsmen. This highly skilled and delicate hand-assembly differentiates Sorane/Abis tonearms from similar mass-produced Japanese tonearms. Standard quality high-volume tonearms are produced by die-casting and semi-automatic assembly line processes to keep production costs low. Skilled hand assembly does not simply mean “combining the constituent parts by hand”. Skilled hand assembly involves measurement, adjustment and hand-fitting to produce optimal interface between machined surfaces. Once completed, the fitment between every part is ideal, satisfying the necessary conditions for vibration-free and noise-free reproduction of analog sound. Most importantly, the key to tonearm quality is highly sensitive and delicate motion, for which the bearings are the determining factor. Concerning the reproduced sound from these models: The designer is confident you will get precise and clean sound, which can only be had from hand-made tonearms, but at a very reasonable price with these arms. In particular, the SA-1.2 will produce rich and tight bass, coming from the extremely rigid rectangular shaped arm-wand. In SA-1.2, two sets of fine radial bearings are installed for both horizontal (set in the bearing stem column in this photo) and vertical (further small bearing at tonearm wand). This assures audiophiles of smooth tonearm function, greater longevity, better consistency, and enhanced ability to track warped vinyl.
Effective Length (Tonearm pivot – stylus) 239mm Practical Length (Tonearm pivot – Spindle) 223mm Overhang 16mm Offset angle 22.25° Horizontal moving sensitivity 30mg Vertical moving sensitivity 20mg Vertical Tracking Force (VTF) range 0-4.5g (2.5g + 2.0g) Cartridge + Headshell weight range 15-45g Height Adjustment（Plinth to arm wand centerline) 15-55mm Vertical Bearing Miniature Radial Bearing Horizontal Bearing Miniature Radial Bearing Output plug RCA (XLR : Option) Output cable Single core shield copper Tonearm Audio Lead wire OFC 4N Copper (Separate wiring in wand) Headshell lead wire Copper with gold plated terminal Headshell Machine tooled Aluminum Tonearm Net Weight 750g Attached standard Headshell Net Weight 17g